DESCRIPTION
Galvanised steel. 3.5m x 2m. Connects with parallel fencing couplers. Anti-climb 30cm vertical mesh aperture to GS7. Uprights supported by separate thermoplastic feet. Vehicle and pedestrian gates available. Can be supported with separate diagonal struts (not pictured).
IMAGE

DESCRIPTION
Pair of temporary fence vehicle gates with padlockable latch closing. Galvanised steel. Total gateway width 4.2m. Connects with parallel fencing couplers. Outer feet sit in thermoplastic block. Inner feet have castor wheels.
IMAGE

DESCRIPTION
Provides a heavy stabilising base with six post holes to set temporary mesh fence panels or hoarding panels upright. Made of thermoplastic utilising recycled material.
IMAGE
![]()
DESCRIPTION
Zinc plated. Clamps the upright tubes of mesh fencing or hoarding panel together. Can be used singly or in pairs.
IMAGE

DESCRIPTION
2.5m x 1.1m connects without fittings. Lightweight steel. Feet detachable.
IMAGE

DESCRIPTION
Interlocking plastic barriers made from recycled high density polythene (HDPE) in two parts. Top section is water-fillable, but the bottom section alone weighs enough to provide a sturdy base for the wall, which is an advantage where a source of water is not readily available. Can be arranged in a tight arc and on a gentle slope.
FEATURES
| Height: | 660mm |
|---|---|
| Length: | 1000mm |
| Width: | 520mm |
| Total Weight: | 21kg |
| Weight of Base: | 18kg |
| Colour: | Top: red, white and orange Base: black |
IMAGE

DESCRIPTION
Interlocking plastic barriers made from recycled high density polythene (HDPE). Designed to stack flat for storage and transport. Feet are detachable and replaceable. Suitable for cordoning off a temporary footway or as a temporary barrier where pedestrians may be present. They can be used to enclose small excavations, piles of building materials and spaces reserved for skips and work vehicles. The inter-connector has been designed to cope with slopes and kerbs. Complies with BS 7818 and the Department of Transport code of practice ‘Safety at Streetworks and Roadworks’.
FEATURES
| Height | 1000mm |
|---|---|
| Length | 2000mm |
| Weight | 5kg |
| Total weight with normal feet | 9kg |
| Total weight with ClearPath feet | 11kg |
| Colour | Orange (standard), other colours on request. |
| Test and data | Avalon with standard feet: maximum wind speed achieved: 17 mph (27km/h) Avalon with ClearPath Feet: maximum wind speed achieved: 20 mph (32km/h) Mira Wind Tunnel Test 02.2009 |
IMAGE
