Allen Key Clamps

Allen key clamps are a range of fittings that connect steel tubes together. They enable the construction of frames and railings where the clamps serve to interconnect the tube ends. They tend to be used for permanent or semi-permanent structures and there are some that can be bolted to hard surfaces such as walls, floors and ceilings. Examples of projects where allen key clamps are often used include edge-protection on flat roofs, hand-rails on ramps and stairs, shopping trolley compounds, hanging rails in store rooms, sign-board mounts, climbing frames, and storage racking in warehouses
Tubes are held in position with stainless steel grub screws that are tightened with an allen key or a ratchet key. If fully tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slip load of 900kg. Allen key clamps supplied by Orchard Hire & Sales are blackheart malleable iron castings manufactured to BS EN 1562:1997 using grade B32-10 material with a hot dipped galvanised finish to BS EN 1461:1999. Allen key clamps and steel tubes are available from Orchard in all five standard sizes, relating to the outer diameter of the tube: a) 26.9mm, b) 33.7mm, c) 42.4mm, d) 48.3mm and e) 60.3mm. Sizes a, b & c take a 1/4″ allen key. Sizes d & e take a 5/16″ allen key.